Diagnostic value of cone beam computed tomography for root canal morphology assessment - a micro-CT based comparison.

OBJECTIVES: The aim of this study was to assess cone beam computed tomography (CBCT) as a root canal anatomy diagnostic tool by comparison with micro-CT gold-standard. MATERIALS AND METHODS: 216 two-rooted mandibular molars were first scanned in a CBCT device (200 µm voxel size) and posteriorly in a micro-CT scanner (19.61 µm). The volumes were sequentially screened to classify main root canal anatomy according to Vertucci classification, and for the presence of lateral canals and apical deltas, in both mesial and distal roots. RESULTS: Both methods revealed a higher prevalence of Vertucci Type II and IV in the mesial root, and Vertucci Type I in the distal root. The percentage of agreement for main root canal anatomy classification between CBCT and micro-CT scores was high (85.2%). CONCLUSION: Sensibility to detect both lateral canals and apical deltas with CBCT was low. These results attest to the fact that minor anatomical changes might be difficult to identify with CBCT imaging, hampering its diagnostic value.

Assessment of the root and canal morphology in the permanent dentition of Saudi Arabian population using cone beam computed and micro-computed tomography - a systematic review.

INTRODUCTION: Root canal treatment procedures require a thorough understanding of root and canal anatomy. The purpose of this systematic review was to examine the morphological differences of teeth root and their canals assessed using cone-beam computed and micro-computed tomography in Saudi Arabian population. METHODOLOGY: An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies. RESULTS: The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 µm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 µm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology. CONCLUSION: This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.

Dental age assessment in the living: a comparison of two common stage classifications for assessing radiographic visibility of the root canals in mandibular third molars.

After dentition is complete, degenerative tooth characteristics can be used for dental age assessment. Radiological assessment of the visibility of the root canals of the mandibular third molars in dental panoramic radiographs (DPRs) is known to be one such suitable feature. Essentially, two different stage classifications are available for evaluating the visibility of the root canals of mandibular third molars in the DPR. The aim of this study was to determine if one method outperforms the other. Therefore, the 2010 method of Olze et al. was directly compared to the 2017 method of Lucas et al. in the 2020 modification of Al Qattan et al. To this end, 233 DPRs from 116 females and 117 males aged 20.0 to 40.9 years were evaluated by three independent experienced examiners. In addition, one examiner ran two independent evaluations. Correlation between age and stage was investigated, and the inter- and intra-rater reliability was estimated for both methods. Correlation between age and stage was higher with the Olze method (Spearman rho 0.388 [95% CI 0.309, 0.462], males and 0.283 [95% CI 0.216, 0.357], females) than the Lucas method (0.212 [95% CI 0.141, 0.284], males and 0.265 [95% CI 0.193, 0.340], females). The intra-rater repeatability of the Olze method (Krippendorff's α = 0.576 [95% CI 0.508, 0.644], males and α = 0.592 [95% CI 0.523, 0.661], females) was greater than that for the Lucas method (intra-rater α = 0.422 [95% CI 0.382, 0.502], males and α = 0.516 [95% CI 0.523, 0.661], females). Inter-rater reproducibility was also greater for the Olze method (α = 0.542 [95% CI 0.463, 0.620], males and α = 0.533 [95% CI 0.451, 0.615], females) compared to the Lucas method (α = 0.374 [95% CI 0.304, 0.443], males and α = 0.432 [95% CI 0.359, 0.505], females). The method of Olze et al. was found to present marginal advantages to the Lucas et al. method across all examinations and may be a more appropriate method for application in future studies.

Worldwide Assessment of the Root and Root Canal Characteristics of Maxillary Premolars - A Multi-center Cone-beam Computed Tomography Cross-sectional Study With Meta-analysis.

INTRODUCTION: This worldwide study examined the root and root canal characteristics of maxillary premolars and explored how demographic factors impact the outcomes. METHODS: Observers from 44 countries assessed 26,400 maxillary premolars using cone-beam computed tomography and employed a standardized screening method to gather data on multiple canal morphology and 3-rooted configuration (primary outcomes), as well as secondary outcomes related to root and root canal anatomies. Demographic factors such as ethnicity, sex, and age were collected for each participant. The intra- and inter-observer tests ensured observer reliability. Primary outcomes were represented as odds ratios and untransformed proportions accompanied by 95% confidence interval (CI) forest plots. Meta-analysis compared sub-groups and identified sources of heterogeneity (α = 5%). RESULTS: The overall prevalence of multiple canal morphology in the first premolar was 93.5% (95% CI, 93.3%-94.7%), while in the second premolar, it was 49.7% (95% CI, 44.9%-54.6%). The proportion of 3-rooted configuration was 1.8% (95% CI, 1.4%-2.1%) in the first premolar and 0.4% (95% CI, 0.3%-0.5%) in the second. Asian countries generally displayed fewer roots and root canals, while European nations showed higher counts (P < .05). Males exhibited higher percentages and odds ratios for both outcomes in both premolars. Younger patients demonstrated lower percentages of multiple root canal morphologies (P < .05). Factors such as tooth side, voxel size and field-of-view did not influence the outcomes (P > .05). CONCLUSIONS: The worldwide assessment of root and root canal characteristics of maxillary premolars has revealed a discernible influence of various factors such as tooth type, geographical region, ethnicity, sex, and age.

Cone-Beam Computed Tomography Assessment of Prevalence of Procedural Errors in Maxillary Posterior Teeth.

A range of procedural errors can occur when performing endodontic treatment on posterior teeth. These errors may decrease the success rate in endodontic practice. This study assessed the prevalence of procedural errors and the quality of endodontic treatments in maxillary molars and premolars using cone-beam computed tomography (CBCT). CBCT scans from two private radiology centers were assessed retrospectively to ensure the same calculated sample size of 327 teeth for each of the four maxillary posterior tooth types (a total of 1,308 endodontically treated teeth). Image sets were evaluated for procedural errors categorized as follows: obturation length (overfilling or underfilling by >2 mm short of the root apex), missed canals, perforations, strip perforations (with extrusion of material into the furcation area), separated instruments in the root canal space, and root fracture. Data were analyzed with SPSS version 20 (SPSS Inc., Chicago, IL, USA), and frequency data was assessed using the Monte Carlo test at the 0.05 level of significance. The procedural errors most commonly reported in the present study were from most frequent to least frequent: underfilled canals (50.0%), missed canals (27.5%), overfilled canals (12.5%), apical perforations (5.0%), separated instruments (3.1%), and root fractures (1.9%). No strip perforations (with extrusion of material into the furcation area) were seen in the study (0%). Underfilled and missed root canals were the most frequent procedural errors identified in the present study. These findings underline the importance of more consideration of critical working length management during all stages of root canal treatment, greater awareness of root canal anatomy, and the use of imaging and diagnostic devices that enhance the ability to identify and treat root canals both safely and effectively.

Assessment of the relationships between posterior root apices and the maxillary sinus floor: a comparison of panoramic radiography and cone beam computed tomography.

The aim of this study was to evaluate the relationships between the apices of posterior teeth and the maxillary sinus floor, comparing the results of assessments performed with panoramic radiography and cone beam computed tomography (CBCT). This retrospective cross-sectional study consisted of 96 participants with a total of 302 maxillary posterior teeth. On both panoramic radiographs and corresponding CBCT images, 735 roots were classified into 3 categories according to their topographic relationship with the maxillary sinus: class 1, clear, distinct distance between the root tips and the floor of the sinus; class 2, roots adjacent to the floor of the maxillary sinus; or class 3, roots protruding into the maxillary sinus cavity. Panoramic radiographic signs of root protrusion into the sinus (class 3) were categorized as projection, discontinuity, missing lamina dura, darkening, or kinking. The observed data were analyzed using statistical software, and the Cohen κ coefficient was calculated. The level of significance was set at P < 0.05. Multiple logistic regression was performed to identify the predictive radiographic signs of protrusion into the sinus. The overall correlations between panoramic radiography and CBCT classifications were 90.8%, 66.8%, and 47.1% for the class 1, class 2, and class 3 categories, respectively. The radiographic signs of projection and darkening were significant predictors of root protrusion (P < 0.05). Panoramic radiography is reliable for assessing root posi¬tions when there is a clear distance between the roots and the floor of the maxillary sinus. However, when the roots are in contact with or have protruded into the sinus on panoramic images, the results are not definitive, and CBCT should be performed.

Assessment of the Prevalence of Radix Entomolaris and Distolingual Canal in Mandibular First Molars in 15 Countries: A Multinational Cross-sectional Study with Meta-analysis.

AIM: The aim of this study was two-folded: i) to assess the prevalence of Distolingual Canal (DLC) and Radix Entomolaris (RE) in Mandibular First Molars (M1Ms), using Cone Beam Computed Tomography (CBCT) images and ii) to assess the impact of sociodemographic factors on the prevalence of these conditions worldwide. METHODS: CBCT images were scanned retrospectively and the ones including bilateral M1Ms were included in the study. The evaluation was performed by 1 researcher in each country, trained with CBCT technology. A written and video instruction program explaining the protocol to be followed step-by-step was provided to all observers to calibrate them. The CBCT imaging screening procedure consisted of evaluating axial sections from coronal to apical. The presence of DLC and RE in M1Ms (yes/no) was identified and recorded. RESULTS: Six thousand three hundred four CBCTs, representing 12,608 M1Ms, were evaluated. A significant difference was found between countries regarding the prevalence of both RE and DLC (P < .05). The prevalence of DLC ranged from 3% to 50%, and the overall prevalence was 22% (95% CI: 15%-29%). RE prevalence ranged from 0% to 12%, and the overall prevalence was 3% (95% CI: 2%-5%). There were no significant differences between left and right M1Ms or between genders for either DLC or RE (P > .05). CONCLUSION: The overall prevalence of RE and DLC in M1Ms was 3% and 22%. Additionally, both RE and DLC showed substantial bilaterally. These variations should be considered by endodontic clinicians during endodontic procedures in order to avoid potential complications.

Assessment of the canal anatomy of the premolar teeth in a selected Turkish population: a cone-beam computed tomography study.

BACKGROUND: Teeth may have additional roots and a different number of root canals. Overlooked root canals may cause endodontic failure. The aim of this study was to investigate the prevalence of root canals and the number of roots of premolars in a selected Turkish population. MATERIALS AND METHODS: A total of 2,570 teeth from 1,438 patients were evaluated. The cone-beam computed tomography scans of 1,055 maxillary and 1,515 mandibular premolars were examined. RESULTS: Type IV root canal morphology was observed most frequently in maxillary first premolars (77%), and the rates of single and double channel formations were very similar (51% and 49%, respectively). Of the second maxillary premolars, 57.4% had Type I morphology, and 89.9% of the teeth were single-rooted, while 68.6% had a single root canal. The most common formation was Type I (85%) among mandibular first premolars, and a single root was observed in 95.6% of these teeth. In addition, 87% of the mandibular first premolars had a single root canal. The second mandibular premolars mostly had Type I (95.4%) formation, and 99.3% of the teeth were single-rooted, while 96.9% had a single root canal. CONCLUSION: According to our findings, 51% of maxillary first premolars had a single root, 79.4% had two root canals, and 77% had Type IV (77%) formation. Maxillary second premolars mostly had Type I formation. In addition, a single root and single root canal formation were most common. Mandibular first premolars generally had a single root and single root canal formation, but 13% had two root canals, and 6.4% had Type V formation. More than 95% of mandibular second premolars had Type I formation.

Cone-Beam Computed Tomography Assessment of Quality of Endodontic Treatment and Prevalence of Procedural Errors in Mandibular Molars.

Objectives: This study assessed the quality of endodontic treatment and the prevalence of procedural errors in permanent mandibular molars using cone-beam computed tomography (CBCT). Materials and Methods: This cross-sectional study was conducted on 328 CBCT scans (182 females and 146 males) of endodontically treated mandibular molars retrieved from the archives of two radiology centers in Ardabil city, Iran, in 2019. Mandibular molars were evaluated on sagittal, coronal, and axial sections regarding obturation length, obturation density (voids), missed canals, broken instruments, apical perforation, strip perforation, ledge formation, transportation, root fracture, root resorption, and periapical lesions by a senior dental student under the supervision of an oral and maxillofacial radiologist and an endodontist. Differences between the frequency of procedural errors and tooth type and gender were analyzed by the chi-square test. Results: The frequency of underfilling, missed canals, overfilling, voids, apical perforation, transportation, ledge formation, broken instruments, root fracture, strip perforation, root resorption, and periapical lesions was 34.8%, 17.4%, 16.8%, 14.3%, 7.3%, 6.1%, 4.3%, 3%, 1.2%, 0.6%, 5.5%, and 46%, respectively. The frequency of root fracture was significantly higher in females than in males (P < 0.05). The prevalence of underfilling was the highest in right second molars (47.2%), followed by right first molars, left second molars, and left first molars (P < 0.005). The frequency of transportation was maximum in right first molars (10%), followed by right second molars, left first molars, and left second molars (P < 0.04). Conclusion: Underfilling, missed canals, and overfilling were the most prevalent procedural errors in mandibular molars in our study population.

Assessment of infrazygomatic crest dimensions in different vertical facial growth types for miniscrew insertion: A cone-beam computed tomography study.

INTRODUCTION: This study aimed to assess the depth and height of the infrazygomatic crest (IZC) located in the posterior maxilla at the junction with the zygomatic process in patients with different vertical facial growth types as a potential miniscrew insertion site. METHODS: The sample consisted of cone-beam computed tomography scans of 117 patients (42 males and 75 females), with a mean age of 22.9 ± 2.7. The population was divided into 3 groups according to the measured SN-GoGn angle: Decreased facial proportions (n = 28), average facial proportions (n = 62), and increased facial proportions (n = 27). Bone depth was assessed at 5 levels: apex, 1, 2, 3, and 4 mm vertically from the apex. The measurements were performed on the mesiobuccal and distobuccal roots of the first molar and the mesiobuccal root of the second molar. Repeated-measure analysis of variance followed by univariates analyses and Bonferroni multiple comparisons were performed to compare the mean bone thickness between groups. The IZC height was assessed through a vertical line ranging from the furcation of the maxillary first molar to the sinus floor. Analysis of variance followed by Tukey (honestly significant difference) post-hoc tests was used to compare the mean height between groups. RESULTS: Mean bone depth between the 3 groups were significantly different at the mesiobuccal root region of the first molar at all the measured levels. It was smaller for average, intermediate for decreased, and elevated for increased facial proportions. No statistical difference was shown at the distobuccal root of the first molar except for the apex level and the mesiobuccal root of the second molar except for the apex and 4 mm levels. The mean bone height was significantly different between subjects with increased facial proportions and the 2 other groups. CONCLUSIONS: Subjects with increased facial proportions tend to present a longer and deeper IZC followed by decreased facial proportions, then average facial proportions.

A novel three-dimensional quantitative assessment method for abnormal root morphology of the maxillary premolars in vivo on cone-beam computed tomography.

BACKGROUND: Previous studies have described and recorded abnormal root morphology; however, most of these studies were based on two-dimensional periapical or panoramic radiographs, and only a few studies have quantified it. We aimed to combine two-dimensional periapical radiographs and three-dimensional cone-beam computed tomography (CBCT) to conduct qualitative judgments and quantitative analyses of normal and conical roots, and explore the clinical diagnostic method of normal and conical roots based on intraoral radiographs and CBCT. METHODS: The conical root was identified visually on periapical radiographs as the clinical gold standard. All teeth were divided into the cone-rooted teeth (CRT) or normal-rooted teeth (NRT) groups. Furthermore, differences in root length (RL), root surface area (RSA), and root volume (RV) of conical and normal roots in the maxillary premolars on CBCT were compared. Receiver operator characteristic curves were generated, and the area under the curve (AUC) and cut-off values were calculated to evaluate the diagnostic value of RV, RSA, RV/RL, and RSA/RL. RESULTS: The RSAs of NRT and CRT were 236.88 ± 27.93 mm2 and 207.98 ± 27.80 mm2, respectively (P = 0.000). The mean RV in the CRT group was lower than that in the NRT group, and the difference was statistically significant (253.40 ± 41.98 mm3 vs. 316.93 ± 49.89 mm3, P = 0.000). The RSA and RV of conical roots in single root premolars were 12.29% and 19.33% less than those of normal roots, respectively. The AUC values of RSA/RL and RV/RL were 0.87 and 0.89, respectively, and the best cut-off values were 19.61 for RSA/RL (if RSA/RL was < 19.61, the teeth were considered CRT) and 24.05 for RV/RL (if RV/RL was < 24.05, the teeth were considered CRT). CONCLUSIONS: CBCT has significant diagnostic value in the clinical evaluation of conical roots. RSA/RL and RV/RL were the best parameters with the largest AUC and high sensitivity and specificity.

Assessment of C-Shaped Canal Morphology in Mandibular and Maxillary Second Molars in an Iraqi Subpopulation Using Cone-Beam Computed Tomography.

Endodontic treatment is basically dependent on knowledge of the root canal anatomy. The goal of this study was to use cone-beam computed tomography (CBCT) imaging to examine the C-shaped canal configuration of mandibular and maxillary second molars in an Iraqi subpopulation. The prevalence and configurations of C-shaped canals were evaluated in 368 mandibular second molars and 369 maxillary second molars using CBCT scans. The effects of gender, age, and unilateral/bilateral on the presence of C-shaped canals were investigated. Chi-square and Fisher's exact tests were used to determine the level of significance (p ≤ 0.05), and kappa value was used to check reliability of results of the research. In mandibular second molars, the prevalence of C-shaped canals was 17.4%. The prevalence was significantly higher in females (23%) than males (10.4%) using the chi-square test. There is no significant difference in the prevalence of C-shaped canal depending on age and tooth position. The C2 type was the most common (56.3%). This prevalence did not differ with gender, age, or tooth position. In maxillary second molars, C-shaped canals were present in 7.9%. Type I (subtype C) (fusion of 2 root canals MB-DB) was the most common type of fused root (65.5%). There is no significant difference in the prevalence of C-shaped canal depending on the type of fused root, age, and tooth position. The majority of C-shaped canals in mandibular second molars were bilateral in both genders, but unilateral presence was more common in maxillary second molars in both genders. Within the limits of this study, C-shaped canals were found to be more common in mandibular second molars than in maxillary second molars in an Iraqi subpopulation.

Three-dimensional assessment of the favorability of maxillary posterior teeth intrusion in different skeletal classes limited by the vertical relationship with the maxillary sinus floor.

BACKGROUND: Understanding the anatomical relationship between the maxillary sinus floor (MSF) and the posterior maxillary teeth (PMT) is important when planning the orthodontic intrusion of the posterior teeth. This study aimed to determine the vertical relationship between posterior maxillary teeth and maxillary sinus floor in different skeletal classes in the Chinese adult population. METHODS: This is a retrospective cross-sectional study involved cone beam computed tomography images of 298 adult patients (145 males and 153 females) between 20 and 45 years old. The sample was categorized according to A point, Nasion, B point (ANB) angle into 102 Class I, 102 Class II, and 94 Class III malocclusion. Non-parametric Wilcoxon Mann-Whitney U and Kruskal-Wallis tests were used to compare the studied groups. The Intra-class Correlation Coefficient (ICC) was used to assess the intra- and inter-observer reliability analysis. RESULTS: Overall, there was a statistically significant difference in the mean distance between both genders (P < 0.001). The measured distance increased with age in all posterior tooth roots (P < 0.001). The root apex in the sagittal view appeared to be closer to the maxillary sinus than in the coronal view; 2.2 ± 4.3 and 3.1 ± 5.5 mm, respectively. The most frequent root scores were Type 1 and Type 2P. In both sagittal and coronal views, Class I demonstrated a higher Type 2P prevalence, whereas Class III showed a lower prevalence. The second molars' mesiobuccal root had the largest number of penetration in the three examined skeletal classes. CONCLUSIONS: Maxillary molars of Class I malocclusion with the majority of Type 2P root-sinus relationship have the highest possible risk of root resorption during molar intrusion due to cortical bone encroachment, while Class III malocclusion showed the least possible risk.

Three-dimensional assessment of the favorability of maxillary posterior teeth intrusion in different facial patterns limited by the vertical relationship with the maxillary sinus floor.

OBJECTIVE: Posterior teeth intrusion is one of the best treatment options for treatment of skeletal open bite in adults; the surrounding anatomical landmarks are one of the restraining factors. This study aimed to assess the vertical relationship between the maxillary posterior teeth (MPT) and the maxillary sinus floor (MSF) in different facial growth patterns in the Chinese adult population. MATERIALS AND METHODS: Cone beam computed tomography images of 298 patients, 145 males and 153 females aged between 20 and 45 years, were analyzed. Based on Jarabak ratio and the mandibular plane inclination, the sample was categorized into 94 hyperdivergent, 102 hypodivergent, and 102 normodivergent facial patterns subjects. The vertical relationship between the root-apex distances were classified as favorable, indicating no contact (type 1), or unfavorable, indicating roots in contact (type 2) for the posterior teeth intrusion. The relationship in the unfavorable group was subdivided into three subgroups (T2C, T2LC, and T2P). Comparative statistical tests were done related to age, gender, tooth side, and type of multiplanar view (sagittal and coronal). The significant level was set to be P < 0.05. RESULTS: There was a statistically significant difference in the mean distance between both genders in the hyperdivergent group (P < 0.001). The measured distance increased with age in all tooth roots (P < 0.001). In both sagittal and coronal views, the most frequent root scores were type 1 and type 2p (54.2%, 27.5%) and (55.1%, 21.4%), respectively. The hyperdivergent group demonstrated a higher prevalence of type 2P (31.6% and 25.5%), whereas the hypodivergent group showed a lower prevalence (25.1% and 19.2%); furthermore, the second molar's mesiobuccal root in hyperdivergent patients showed the closest distance to the maxillary sinus in sagittal and coronal views, 0.3 ± 3.7 and 0.4 ± 3.1 mm, respectively. CONCLUSIONS: Maxillary molars of hyperdivergent patients have the highest possible risk of root resorption due to the possible risk of cortical bone encroachment, while hypodivergent patients have the least possible risk. CLINICAL RELEVANCE: Analysis of apex-sinus distances can be of great help for safe posterior teeth intrusion and providing correct and adequate treatment.

Evaluation of the combined assessment of two digital enhancement filters in periapical radiographs obtained with different projection angles in the detection of simulated dental root fractures.

OBJECTIVE: To evaluate the diagnostic efficacy of the combined assessment of the original radiographic image with the Invert or Emboss digital enhancement filters in periapical radiographs obtained with different horizontal projection angles in the detection of simulated dental root fracture. MATERIALS AND METHODS: Thirty-four single-rooted teeth were selected, out of which 17 teeth were subjected to root fracture. Each tooth was individually placed in an empty socket of a dry human maxilla or mandible and X-rayed following the paralleling technique at three horizontal projections: mesial, right angle, distal. Then, the Invert and Emboss enhancement filters were applied. Five examiners independently evaluated all the images and rated the fractures using a 5-point scale. Weighted kappa test assessed the intra- and interexaminer agreements. Diagnostic values were calculated and the areas under the receiver operating characteristic curve (AUC) were compared using two-way ANOVA with Tukey test as post hoc (α = 0.05). RESULTS: The inter- and intraexaminer agreement ranged from moderate to almost perfect and from substantial to almost perfect, respectively. Diagnostic values were considerably high for all conditions with no significant difference between the AUC values (p > 0.05). CONCLUSIONS: The combined use of the original radiographic image with the Invert or Emboss digital enhancement filters in periapical radiographs obtained with different projection angles did not influence the detection of simulated dental root fracture.

Worldwide Assessment of the Mandibular First Molar Second Distal Root and Root Canal: A Cross-sectional Study with Meta-analysis.

INTRODUCTION: This study assessed the prevalence of radix entomolaris and 2 canals at the distal aspect of mandibular first molars among different geographic regions by means of cone-beam computed tomographic imaging. METHODS: Precalibrated observers from 23 worldwide geographic locations followed a standardized screening protocol to assess 5750 cone-beam computed tomographic images of mandibular first molars (250 per region), gathering demographic data and recording the presence of radix entomolaris and a second canal at the distal aspect of teeth. Intra- and interrater reliability tests were conducted and comparisons among groups were performed using proportions and odds ratio forest plots. The significance level was set at 5%. RESULTS: The results of intra- and interrater tests were above 0.79. The prevalence of radix entomolaris varied from 0.9% in Venezuela (95% confidence interval [CI], 0%-1.9%) to 22.4% in China (95% CI, 17.2%-27.6%). Regarding the proportion of a second distal canal, it ranged from 16.4% in Venezuela (95% CI, 11.8%-21.0%) to 60.0% in Egypt (95% CI, 53.9%-66.1%). The East Asia subgroup was associated with a significantly higher prevalence of an extra distolingual root, whereas the American subgroup, the American native ethnic group, and elderly patients were linked to significantly lower percentages of a second canal at the distal aspect of teeth. No significant differences were noted between male or female patients. CONCLUSIONS: The overall worldwide prevalence rates of radix entomolaris and a second canal at the distal aspect of the mandibular first molar were 5.6% and 36.9%, respectively. The East Asia geographic region and Asian ethnic group had a higher prevalence of a second distal root.

Assessment of root morphology and canal configuration of maxillary premolars in a Saudi subpopulation: a cone-beam computed tomographic study.

BACKGROUND: The objective of this study was to use CBCT to look into the root canal morphology of maxillary premolars in a Saudi Arabian subpopulation and associate the results to existing canal morphology classifications. METHODS: The sample size for this analysis was 500 right and left untreated maxillary first and second premolars with fully formed roots from 250 Saudi residents (125 male and 125 female). The following observations were made using CBCT on the teeth related: (1) The number and morphology of roots; (2) The canal morphology for each root according to Vertucci's classification. The frequency and similarities between the right and left sides, as well as between females and males, were studied. The Chi-square test was used to assess the results. RESULTS: Of the 500 maxillary first premolars studied, 199 teeth had one root (39.8%), whilst 293 (58.6%) were two-rooted. Three-rooted maxillary first premolars were found in 8 (1.6%). For maxillary second premolars, 416 premolars had one root (83.2%), whilst 79 (15.8%) had two roots and the rest 5 (1.0%) were three roots. There were significant differences of number of root were found between groups (p > 0.05). For maxillary first premolar, Type IV was the most frequent, accounting for 57.8% of the sample (n = 289), followed by type II (32.8%, n = 164). For maxillary second premolar, Type I was mainly occurrence 302 (60.4%), followed by Type II (16.4%, n = 82). CONCLUSIONS: The majority of maxillary first premolars had two roots and two root canals, while one root and one root canal was the most common anatomical configuration for maxillary second premolars. Additional canal forms do occur on occasion, and clinicians should pay close attention to them.

Assessment of the Metal Artifact Reduction Tool for the Detection of Root Isthmus in Mandibular Molars with Intraradicular Posts in Cone-beam Computed Tomographic Scans.

INTRODUCTION: This study evaluated the performance of the metal artifact reduction (MAR) tool in cone-beam computed tomographic scans using different fields of view (FOVs) in the detection of a root isthmus in mandibular molars with intraradicular posts. METHODS: Twenty-eight teeth were scanned by micro-computed tomographic imaging (gold standard images). Thereafter, specimens were allocated into the following groups: gutta-percha (teeth without posts, n = 10), a prefabricated metal post (n = 9), and a fiberglass post (n = 9). Cone-beam computed tomographic scans were taken using 8 acquisition protocols, varying the size of the FOV (10 × 5.5 cm and 5 × 5.5 cm) and the MAR tool (disabled, low, normal, and high modes). A root isthmus was evaluated considering a 5-point scale. Data were analyzed considering a 5% significance level. RESULTS: Intra- and interexaminer agreement varied from moderate to substantial. The frequency of correct diagnosis varied significantly in all groups regardless of the image acquisition protocol selected (P < .05). In the gutta-percha group, there was no difference in the accuracy, sensitivity, and specificity values between the tested protocols. In the metal and fiberglass post groups, the accuracy values were higher with the "disabled" and "low" modes of the MAR tool regardless of the FOV size. This was also observed for the sensitivity values in the metal post group (P < .05). CONCLUSIONS: The size of the FOV did not affect the performance of the MAR tool in the diagnosis of a root isthmus in molars with intraradicular posts. Our findings suggest that the use of the tool in the "normal" and "high" modes is contraindicated for this purpose.

CBCT-based assessment of the anatomic relationship between maxillary sinus and upper teeth.

OBJECTIVES: To describe the relationship between maxillary sinus (MS) and upper teeth based on cone beam computed tomographic scans (CBCT). MATERIALS AND METHODS: Based on CBCT maxillary imaging data of 147 patients, distance between MS and apices of canines and posterior maxillary teeth were assessed. Distances between tooth roots and sinus were classified into three groups: distant (>2 mm), close (<2 mm) or in contact with MS. Teeth with apical lesions and uncommon root configurations were excluded. RESULTS: In total, 1075 teeth of maxillary canines, upper premolars and upper molars were included in this study. Teeth most often in contact with MS were the second (89%) and first (81%) maxillary molar without any significant difference (p = 0.19). Roots most often in contact with MS were the mesiobuccal and distobuccal root of the second molar (85% and 76%; p = <0.01) followed by the palatal root of the first molar (73%). A fifth of the upper canines are situated less than 2 mm from MS. CONCLUSIONS: More than four out of five upper molars (first and second) are in a close relationship to the MS. Knowledge of the anatomical relationship between posterior maxillary teeth and the MS is important for diagnosis and treatment in this area.

Combined Use of 2 Cone-beam Computed Tomography Scans in the Assessment of Vertical Root Fracture in Teeth with Intracanal Material.

INTRODUCTION: The purpose of this preliminary study was to evaluate the diagnostic accuracy of the combined use of 2 cone-beam computed tomographic (CBCT) volumes obtained with the tooth of interest positioned at different orientations in the detection of vertical root fracture (VRF). METHODS: Thirty single-rooted teeth were divided into 2 main groups (n = 15): control and with VRF. The teeth were individually placed in a phantom composed of a human skull and mandible, which was CBCT scanned in 2 spatial orientations: conventional (with the Frankfurt plane parallel to the floor) and angled acquisition (tilted 90° backward). Also, each tooth was scanned with gutta-percha, a metal post, and without any intracanal material. Three oral radiologists individually evaluated the images resulting from conventional acquisition and verified the presence or absence of VRF (conventional CBCT assessment), setting a score on a 5-point scale. Subsequently, the observers evaluated both images resulting from the conventional and angled acquisitions (combined CBCT assessment). The diagnostic values of the conventional and combined assessments were compared using 2-way analysis of variance with the post hoc Tukey test. The significance level was set at 5% (α = 0.05). RESULTS: The combined CBCT assessment showed higher accuracy and sensitivity in the VRF diagnosis of teeth filled with gutta-percha (P < .05). In teeth with a metal post, all diagnostic values were higher in the combined CBCT assessment (P < .05). CONCLUSIONS: This preliminary study suggests that the CBCT-based diagnosis of VRF in teeth with intracanal material was improved when the assessment combines images obtained at 2 orientations.